The BIOS is in charge of setting up hardware components, initializing them, and giving the appropriate instructions for the booting process. However, occasionally, it can be damaged, leading to issues with your computer. You must reset the BIOS (Basic Input/Output System) if your computer is having trouble starting up with its hardware or if security breaches have occurred. This is why you must know how to reset BIOS without display.
Today, we will be talking about this procedure as there can be a possibility when your hardware stops working properly, and you have to reset things on your own.
Table of contents
How To Reset BIOS Without Display – Step by Step
In some cases, you may not be able to access the BIOS settings due to a display problem. Here are the steps you can take to reset the BIOS without a display:
1: Shut down your computer
The first step is to shut down your computer properly. Press and hold down the power button on your computer for 5 to 10 seconds until it shuts down completely.
2: Disconnect the power supply and other external devices
Once your computer has been shut down, unplug the power cable from the back of your computer. Also, remove any other external devices that are connected to your computer, such as a printer or scanner.
3: Open the computer case
Locate the screws that are holding the side panel of your computer case in place. Use a screwdriver to take out these screws and gently slide the panel off to expose the inside of your computer.
4: Locate the CMOS battery
The CMOS battery is round battery located on the motherboard. It stores the BIOS settings and keeps the system clock running even when the computer is turned off. Identify the battery on the motherboard and gently remove it using a screwdriver or your fingers.
5: Wait for a few minutes
After removing the CMOS battery, wait for a few minutes. This allows the residual charge in the motherboard to dissipate, which ensures that the BIOS is fully reset.
6: Replace the CMOS battery
Once you’ve waited for a few minutes, reinsert the CMOS battery into its slot on the motherboard. Ensure that the battery is inserted correctly and that it makes good contact with the motherboard.
7: Reassemble your computer
Reattach the side panel of your computer case and tighten the screws. Then, reconnect any external devices that you removed in step 2, such as your printer or scanner. Finally, plug the power cord back into the back of your computer and turn it on.
8: Enter the BIOS setup
When you turn on your computer, it will boot up into the BIOS setup. You may need to press a specific key to enter the BIOS setup, such as F2, F12, or Delete, depending on your computer’s manufacturer. Check your computer’s documentation to determine which key to press.
9: Load default BIOS settings
Once you’re in the BIOS setup, locate the option to load default BIOS settings. This option may be labeled as “Load Optimized Defaults” or “Load Setup Defaults.” Choose this option to load the default settings for your BIOS.
10: Save and exit BIOS
After loading the default BIOS settings, save the changes and exit the BIOS setup. Your computer should now be reset, and the display issue should be resolved. Some motherboards have a clear CMOS jumper that you can use to reset the BIOS. Check your motherboard manual for more information on this process. In some cases, resetting the BIOS may not solve the problem. If this is the case, you may need to replace the CMOS battery or seek professional help to diagnose the issue.
It is important to note that resetting the BIOS will erase any custom settings you have configured, such as boot order, overclocking settings and password protection. You will need to reconfigure these settings after resetting the BIOS.
Resetting the BIOS without a display can be a daunting task, but it is essential to do so in case of any issues with your computer’s BIOS settings. While it may seem complicated, the process is relatively simple and can be accomplished in a few steps. Remember to proceed with caution and follow the steps that are shared in this guide carefully to avoid causing any damage to your system.
What happens if I reset the BIOS without a display?
Resetting the BIOS without a display should not affect your system negatively. The process simply reverts the BIOS to its default settings, and you will need to reconfigure any custom settings you may have had previously.
Can I reset the BIOS using the CMOS jumper?
Yes, you can reset the BIOS using the CMOS jumper on your motherboard. The process involves moving the jumper from its default position to its reset position for a few seconds before moving it back to its original position.
Will resetting the BIOS erase my data?
No, resetting the BIOS will not erase any data on your hard drive. The BIOS settings are stored on a separate chip on the motherboard, and resetting it only affects these settings.
What should I do if resetting the BIOS doesn’t work?
If resetting the BIOS doesn’t solve your issue, you may need to seek further assistance from a professional or contact your motherboard manufacturer’s support team. They may be able to help you troubleshoot the issue and provide additional solutions.